Serum Amyloid A Assay Kit (latex immunoturbidimetry) - NMPA Registration 京械注准20232400604
Access comprehensive regulatory information for Serum Amyloid A Assay Kit (latex immunoturbidimetry) in the China medical device market through Pure Global AI's free database. This Class II medical device is registered under NMPA registration number 京械注准20232400604 and owned by Beijing Homa Biological Engineering Co., Ltd.. The device was approved on September 27, 2023.
This page provides complete registration details including registrant information, province location (Beijing), intended use, and regulatory compliance data from the official China NMPA medical device database. Pure Global AI offers free access to China's complete medical device registry, helping global MedTech companies navigate NMPA regulations efficiently.
This reagent is used for the quantitative determination of serum amyloid A [SAA] concentration in human serum in vitro.
本试剂用于体外定量测定人血清中血清淀粉样蛋白A[SAA]的浓度。
This reagent consists of Reagent 1 (R1), Reagent 2 (R2), calibrator, and quality control Reagent 1 (R1): Phosphate buffered saline 15mmol/L Sodium azide 1g/L Reagent 2 (R2): TAPS buffer 20 mmol/L Coated with anti-SAA antibody latex microspheres 0.2% Sodium azide 1g/L The calibrators (6 levels of liquid, phosphate buffer matrix) were targeted in the range of (level 1: 0.0~5.0 mg/L, level 2: 6.0~19.0 mg/L, level 3: 20.0~45.0 mg/L, level 4: 46.0~95.0 mg/L, level 5: 96.0~195.0 mg/L, level 6: 196.0~500.0 mg/L). Quality control (2 levels of liquid, phosphate buffer matrix), the target concentration range is (level 1: 1.0~29.0 mg/L, level 2: 30.0~70.0 mg/L). Note: 1) The calibrators and quality controls are batch-specific, and the specific concentrations are shown on the label. 2) Traceability of calibrators: In accordance with the requirements of GB/T 21415-2008 "Metrology Traceability of Measurement Calibrators and Assignment of Control Substances in Biological Samples of In Vitro Diagnostic Medical Devices", the source, assignment and measurement uncertainty of calibrators are provided and traced to international reference materials (No. NIBSC92/680).
本试剂由试剂1（R1）、试剂2（R2）、校准品和质控品组成 试剂1（R1）： 磷酸盐缓冲液 15mmol/L 叠氮钠 1g/L 试剂2（R2）： TAPS缓冲液 20mmol/L 包被抗SAA抗体胶乳微球 0.2% 叠氮钠 1g/L 校准品（6水平液体，磷酸盐缓冲液基质），目标浓度范围分别为（水平1：0.0～5.0mg/L、水平2：6.0～19.0mg/L、水平3：20.0～45.0mg/L、水平4：46.0～95.0mg/L、水平5：96.0～195.0mg/L、水平6：196.0～500.0mg/L）。 质控品（2水平液体，磷酸盐缓冲液基质），目标浓度范围分别为（水平1：1.0～29.0mg/L、水平2：30.0～70.0mg/L）。 注：1）校准品、质控品具有批特异性，具体浓度见标签。2）校准品溯源性：按照GB/T 21415-2008《体外诊断医疗器械生物样品中量的测量校准品和控制物质赋值的计量学溯源性》的要求提供校准品的来源、赋值以及测量不确定度等内容，溯源至国际标准物质(编号：NIBSC92/680)。
<span style="f